Table of Contents
Advertisement
Procedure
1
Select the
Operation
The
function is located on the
Operation
2
Select
Operation
Result
The TV80 is now receiving data from the catch monitoring sensors installed.
Recording sensor data
The
function allows you to record the data submitted by the all the "old" PI and PX
Record
MultiSensor sensors installed. The data files can be copied or moved to other recordable
media, or to another computer on the network. You can keep the recorded files for scientific
studies, future references, or for training purposes. The recording is controlled by the
function.
Record
Prerequisites
Before you start data recording, make sure that you have defined where to store the files. To
define which disks and folders to use to save the data files, use the
page is located in the
Setup
external hard disk, make sure that it is connected to the Processor Unit.
Context
Data files will normally become very large. If you wish to record large amounts of TV80
data, make sure that you have enough space on your hard disk. Unless your Processor Unit
is equipped with a very large disk, we recommend that you save the data to an external
storage device.
Procedure
1
Select the
Operation
The icon is located under the
406388/B
icon.
, and set it to Normal.
menu. If you wish to save your recorded data on an
Operation
icon.
menu. It is used to open the
Main
menu.
Operation
File Setup
Getting started
page. The
File
menu.
Operation
49
Advertisement
Table of Contents
