Table of Contents
Advertisement
Context sensitivity
This function is activated only if there is a SR70/SR15 Receiver Unit installed.
Record function
The
function allows you to record the data submitted by the catch monitoring
Record
sensors. You can save to the Processor Unit hard disk, or onto an external disk.
How to open
This function is opened from the
Description
The
button allows you to start and stop recording.
Record
By means of the Replay function you can later play back
the recorded file(s) on the TV80. This may prove useful if
more a detailed study of the data is requested. You can also
use the file(s) to experiment with the TV80 operational
settings, as this will help you to gain more experience. The amount of data you can record is
only limited by the size of your storage media.
Note
Data files will normally become very large. If you wish to record large amounts of TV80
data, make sure that you have enough space on your hard disk. Unless your Processor Unit
is equipped with a very large disk, we recommend that you save the data to an external
storage device.
Details
On/Off
You can use the "menu" under the
middle of the button to open it, and select On or Off. For faster control, use the right
and left side of the
side. To stop recording, click the black rectangle on the left side.
Note
We recommend that you set up all the necessary recording parameters before you start
data recording. To define which disks and folders to use to save the data files, select
. The
File Setup
406388/B
Operation
Record
button. To start recording, click the red circle on the right
Record
dialog box is located on the
File Setup
Functions and dialog boxes
menu.
button to start and stop recording. Click the
Operation
menu.
191
Advertisement
Table of Contents
