Recording Sensor Data; Use The Functionality Provided By The Operating System To Delete The Files, Or To Copy Or Move Them To The Storage Device; Close The File Manager Utility; To Resume Normal Tv80 Operation, Select Any Other Tab On The Bottom Bar - Simrad TV80 Reference Manual

2 Select
File Setup
Observe that the
3 Select
Open Folder
A standard operating system dialog box is used to locate and select the files you wish
to use.
4 In the file manager utility, locate the folder you defined on the
5 Use the functionality provided by the operating system to delete the files, or to copy or
move them to the storage device.
6

Close the file manager utility.

7

To resume normal TV80 operation, select any other tab on the bottom bar.

Related topics
File Setup dialog box, page 192
Record function, page 191
Operation function, page 189
Screen Capture button description, page 147
Screen Captures function, page 213

Recording sensor data

The function allows you to record the data submitted by the all the "old" PI and PX
Record
MultiSensor sensors installed. The data files can be copied or moved to other recordable
media, or to another computer on the network. You can keep the recorded files for scientific
studies, future references, or for training purposes. The recording is controlled by the
function.
Record
Prerequisites
Before you start data recording, make sure that you have defined where to store the files. To
define which disks and folders to use to save the data files, use the
page is located in the
Setup
external hard disk, make sure that it is connected to the Processor Unit.
Context
On the TV80, you can save and recall echo information using the following methods and
formats.
406388/B
.
dialog box opens.
File Setup
to quickly access the destination folder of the specific file.
menu. If you wish to save your recorded data on an
Operation
Operating procedures
page.
File Setup
page. The
File Setup File
137