Table of Contents
Advertisement
Simrad TV80 Reference Manual
Procedure
1
Open the
Setup
2
On the
menu, select
Setup
Observe that the
3
At the bottom of the
The
Add New Sensor
4
Select
.
Yes
5
In the
PX Sensor Configurator
then select
Connect
The
PX MultiSensor mk2 Configurator
6
Select
Unlock measurements
The
Unlock measurements
7
Send the sensor's PCB serial number to your local dealer.
Your local dealer will send you a license key string.
8
Enter the license key and select
9
Select
to close the dialog box.
Close
Result
The
PX MultiSensor mk2 Configurator
as your license allowed, with a maximum of three.
Related topics
Measurements dialog box, page 257
Modifying the parameters of a sensor
When you select
Modify Sensor
communication channel or its main configuration parameters.
Prerequisites
If a sensor was added to the system with the programming cable, you will only be able to
modify its parameters when connected to the cable. If a sensor was added to the system
without the programming cable, you will be able to modify its parameters even if it is
not connected to the cable.
122
menu.
Installation
dialog box opens.
Installation
page, select
Sensor list
dialog box opens.
dialog box, select communication port and sensor type,
.
.
dialog box opens.
Enter
dialog box shows as many "unlocked" measurements
you can change its location on the gear, its name, its
.
Add New Sensor
dialog box opens.
.
.
406388/B
Advertisement
Table of Contents
