Px Multisensor Mk2 Configurator Dialog Box - Simrad TV80 Reference Manual

Simrad TV80 Reference Manual

PX MultiSensor mk2 Configurator dialog box

The
PX Configurator
shall make and which communication channels it shall use for these measurements. The
purpose of the
PX Configurator
so that several sensors can operate together on different communication channels.
How to open
The
PX Configurator
the dialog box, select
Add New Sensor
The page is located in the
Sensor List
located on the
Setup
Description
Catch monitoring sensors are delivered from Kongsberg Maritime AS readily set up with
common default settings. In some cases, you may find that the default parameters do not suit
your operational needs. When required, each individual sensor may be configured to specify
its communication channel and which measurements to make.
236
dialog box allows you to set up which measurements the PX Sensor
dialog box is to be able to set up Simrad's PX MultiSensor
dialog box is opened from the
Add New Sensor
Installation
menu.
dialog box. To open
Add New Sensor
at the bottom of the
dialog box. The
Installation
page.
Sensor list
dialog box is
406388/B