Stopping The Tv80 Program - Simrad TV80 Reference Manual

Stopping the TV80 program

You must never turn off the TV80 by means of the on/off switch on the Processor Unit. You
must always exit the TV80 program by selecting
Context
When you do not use the TV80, turn off the display and the Processor Unit.
Procedure
1 Observe the TV80 presentation.
2 If you are in the
a Select the X button in the top right corner to close the current dialog box.
b Observe that the TV80 switches to normal presentation.
c Select
Exit
3 If you are working in the
a Select
Close
b Select the X button in the top right corner to close the current dialog box.
c Observe that the TV80 switches to normal presentation.
d Select
Exit
4 If you are in a normal presentation:
a Select
Exit
Observe that the TV80 program closes down.
5 If the Processor Unit does not turn itself off automatically, use the functionality
provided by the operating system to switch it off manually.
6 Turn off the display.
If required, refer to the instructions provided by the display manufacturer.
406388/B
dialog box:
Installation
on the top bar.
, or
Gear Setup
.
on the top bar.
on the top bar.
on the top bar.
Exit
dialog boxes:
Select Sensor
Operating procedures
73