Creating A New Sensor View - Simrad TV80 Reference Manual

Getting started
6 Repeat these steps for the next sensor.
Result
The new sensor appears on the page.
Sensor List
The page presents a table with all the catch monitoring sensors that have been
Sensor List
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
Add New Sensor dialog box, page 227
PX TrawlEye Configurator dialog box, page 229
PX MultiSensor mk2 Configurator dialog box, page 236

Creating a new sensor view

When you edit a view, you can add or remove gauges, resize them and save that view with a
name of your choice. In order to create a new view, you have to edit its content or its name.
Prerequisites
In order to create a new view or editing its content, you must open the TV80 .
Designer
There is at least one layout created. In this context, the different combinations of views is
called layout.
Context
In a large system with many sensors in simultaneous use, it can be useful to have different
ways of having the information presented. According to the operating scenario or your
personal preferences, you can choose to edit the content of a view or creating a new one and
apply that selection to your current presentation.
In the TV80, the presentation of sensor data is organized in views. You can choose to
have one, two, three or four views at the same time. If you use less than four views, you
can choose their layout according to your operational requirements or personal preferences.
Each view contains one or more "gauges".
65
406388/B