Table of Contents
Advertisement
Simrad TV80 Reference Manual
Installing the TV80 operational software
Before you can put your Catch monitoring software to work, the operational software must
be installed on the Processor Unit.
Prerequisites
In order to install the software, you need the relevant file set on a suitable media. If the
software is provided on a CD or a DVD, and your computer is not fitted with a suitable
drive, copy the files to a USB flash drive.
Note
Verify that you have administrative rights on the Processor Unit. You need this to install the
software. If you purchased your own computer, you must verify that it meets the technical
requirements. Do this before you install the software.
Context
A valid software license is required to use the program. The license string is added after
the software installation.
Procedure
1
Turn on the Processor Unit.
2
Insert the software media.
If the software is provided on a CD or DVD, and your Processor Unit is not fitted with
a suitable drive, copy the files to a USB flash drive.
3
Use a file manager application on the Processor Unit to access the software files.
4
Double-click
Setup.exe
5
Allow the installation wizard to run. Follow the instructions provided.
We recommend that you install the software in the default folder suggested by the
wizard.
6
Once the software installation has been completed, double-click the icon on the desktop
to start the program.
7
Depending on your operating system parameters, certain dialog boxes may open.
a
The Windows 7 Firewall may open a dialog box requesting information about the
network. Select
b
The operating system may also open other dialog boxes to verify that the software
can run on the computer. You must of course permit this.
54
to start the installation.
, and then select
Public
.
Allow access
406388/B
Advertisement
Table of Contents
