Add Lan Port Dialog Box; Select Input (Serial) Dialog Box - Simrad TV80 Reference Manual

Simrad TV80 Reference Manual

Add LAN Port dialog box

In the dialog box you can add a new Ethernet connection and select the
Add LAN Port
system you want the TV80 to interface.
How to open
To open the dialog box, select at the bottom of the
Add LAN Port Add LAN Port I/O Setup
page.
The page is located in the dialog box.
I/O Setup Installation
Description
When you need to establish an
Ethernet (Local Area Network (LAN))
communication with external sensors or
peripheral systems, you need to add a LAN
Port and select which input you want the
TV80to receive. Select the system you
want to interface from the list provided. If
your equipment is not listed, select
Other
.
hardware

Select Input (Serial) dialog box

Serial line communication is important for TV80 operation. The information from external
devices is based on serial line "datagrams". For most commercial devices, the formats of
these datagrams are defined by NMEA (National Marine Electronics Association). In the
dialog box you can select the input for your available COM port for
Select Input (Serial)
interface purposes.
246
406388/B