Udp Configuration Dialog Box - Simrad TV80 Reference Manual

UDP Configuration dialog box

The Ethernet traffic between the TV80 and some external devices, such as sensors or
peripheral systems, is made using Internet Protocol (IP) and User Datagram Protocol
(UDP) ports. The
UDP Configuration
to receive data from an external device. You can also remove the selected Ethernet port.
How to open
The
UDP Configuration
dialog box. To open, select the LAN port icon in the "block diagram".
The dialog box is located on the
Installation
Description
The User Datagram Protocol (UDP) is one of the core members of
the Internet Protocol Suite, the set of network protocols also used for the
Internet. With UDP, computer applications can send messages, in this
case referred to as datagrams, to other hosts on an Internet Protocol
(IP) network without requiring prior communications to set up special
transmission channels or data paths (TCP).
UDP is sometimes referred to as the Universal Datagram Protocol.
Details
Description
You can change the name
of the port. This will help
you identify it easily.
Local IP
If you have more than one
Ethernet adapter, you must
specify the IP address of the
Ethernet adapter you wish
to use.
Local Port
This port is important if you wish to receive information on the Processor Unit. The
number you define here must match the port number on the "remote device" that is
providing the information.
Hard Type
You can read the name of the external device it is connected to.
406388/B
dialog box allows you to set up the IP address and ports
dialog box, is opened from the
Functions and dialog boxes
page on the
I/O Setup
menu.
Setup
Installation
261