Table of Contents
Advertisement
Simrad TV80 Reference Manual
Deleting and removing sensors
Topics
Removing one or more sensors from the system, page 108
Temporarily removing a sensor from the presentation, page 109
Removing one or more sensors from the system
You can remove any sensor and its configuration associated to a specific gear from the
dialog box. You can delete one or more sensors at the same time.
Installation
Context
The
dialog box can be considered a "management center".It accesses the main
Installation
pages and dialog boxes required to set up the TV80 for operational use. The TV80 is as
flexible as your fishing scenario. Depending on the fishing operation, you may need to work
with different gears, add or remove sensors, change the location of the sensors or even
receive different measurements.
Procedure
1
On the
menu, select
Setup
Observe that the
2
In the
Sensor list
You can select one sensor by clicking on it. If you want to select more than one sensor,
click on all of them or drag the cursor. You can easily identify the selected sensors
because of the red frame around it.
3
At the bottom of the
4
Select
.
Yes
Result
The selected sensors will no longer be installed for that specific gear system.
108
Installation
dialog box opens.
Installation
, select the sensor or sensors you want to remove.
, select
Sensor list
.
.
Remove sensor
406388/B
Advertisement
Table of Contents
