Sr70 Hydrophone Setup Dialog Box - Simrad TV80 Reference Manual

Simrad TV80 Reference Manual

SR70 Hydrophone Setup dialog box

The
SR70 Hydrophone Setup
Receiver. You can select the hydrophone(s) you want to receive the data from the chosen
PX TrawlEye sensor.
How to open
This dialog box is only available if you have set up an Ethernet connection with an SR70
Receiver. This dialog box, is opened from the
To open, select the hydrophone icon on the corresponding "block diagram".
The dialog box is located on the
Installation
Description
The SR70 Receiver has four
parallel receivers built-in. This
allows a simultaneous reception
without any need of switches.
If you click on a hydrophone
icon, it will change its colour
to indicate if it is enabled or
disabled. A red icon means that
the hydrophone is connected.
A grey icon means that the
hydrophone is not connected.
You can select the
Spectrum
icon, under the
Hydrophone
icon to access the
Spectrum
dialog box.
Related topics
Spectrum dialog box, page 212
262
dialog box shows the hydrophones connected to the SR70
I/O Setup
Setup
page on the
Installation
menu.
dialog box.
406388/B