Setting Up The Sensors Alarms - Simrad TV80 Reference Manual

Simrad TV80 Reference Manual
Procedure
1 Select the
Display
The icon is located under the
2 Select the middle of the
Tip
You can also select the [+] or [–] buttons to navigate through the different options.
3 Select where you wish to place the menu.
Result
The menu will automatically appear on the chosen side.
Related topics
Menu Location function, page 204

Setting up the sensors alarms

The dialog box allows you to define alarms related to the information provided
Alarm Limits
by the relevant catch monitoring sensors. Each sensor function has an individual alarm
setting.
Context
Each measurement has an individual alarm setting. In order to enable an alarm, you must
define the minimum and maximum limits within the sensor range, and enable message
and/or audio notification. If the alarm is triggered, an audible signal may be provided and/or
you will receive a message indicating which sensor caused the alarm.
Procedure
1 Select the
Setup
The icon is located under the
2 Select
Alarm Limits
3 For each catch sensor:
84
icon.
menu. It is used to open the
Main
Menu Location
icon.
menu. It is used to open the
Main
to open the dialog box.
button to open the list of available options.
menu.
Display
menu.
Setup
406388/B