Table of Contents
Advertisement
view contains one or more "gauges". According to the operating scenario or your personal
preferences, you can choose to edit the content of a view or creating a new one and apply
that selection to your current presentation.
Procedure
1
Select a view in order to "activate" it.
An active view is identified with its red border lines.
2
Drag the cursor to the right side of the active view.
The
shortcut menu opens.
View
Note
You may need to hide the main menu or move it to the left hand side of your presentation.
3
Select
Load View
The
dialog box opens.
Load View
4
Select a view from the list of "Predefined" or "User" views on the
left hand side.
5
Select
.
Use View
The selected view is applied to your current layout.
Related topics
Opening the Designer module, page 167
Gauges dialog box, page 181
Edit Gauge dialog box, page 183
Removing noise from the TrawlEye view
The
analyses the historical information from previous consecutive pings in
Ping-Ping Filter
order to remove unwanted noise and interference from the TV80 presentation.
Context
The following filter options are provided.
•
: The filter is disabled. The historical information from previous transmissions
Off
("pings") are not used to remove noise and unwanted echoes.
•
: Select Weak to allow the filter to compare the echoes from the latest two pings.
Weak
For the current echo to be shown, it must be present in both of these pings.
406388/B
.
Operating procedures
97
Advertisement
Table of Contents
