Unlock Measurements Dialog Box; Pitch And Roll Calibration Dialog Box - Simrad TV80 Reference Manual

Unlock measurements dialog box

The
Unlock measurements
your PX MultiSensor mk2, PX Universal and PX MultiCatch to make.
How to open
The
Unlock measurements
box can be opened from the
button in any of
measurements
the dialog boxes.
PX Configurator
The
PX Configurator
is opened from the
Add New Sensor
dialog box. To open the
dialog box, select
Sensor
at the bottom of the
Sensor
page. The
list Sensor List
located in the
Installation
box. The
Installation
is located on the
Setup
Description
By default, PX MultiSensor mk2,
PX Universal, and PX MultiCatch
sensors can send 2 measurements.
When interfacing a SR type receiver unit, a PX Family sensor can send up to five
measurements. Additional measurements (up to 3) can be added.
Note
If you wish to make more than two measurements with your sensor, an additional license is
required. In order to obtain a license, contact your local dealer.

Pitch and roll calibration dialog box

If you wish to use the PX Multisensor to measure the pitch and roll of the trawl doors, you
must calibrate the sensor. You can calibrate a sensor in the
dialog box.
Prerequisites
Calibration must be done with the sensor mounted in its installation adapter on the trawl
door(s).
406388/B
dialog box allows you to unlock extra measurements you want
dialog
Unlock
dialog box
Add New
Add New
Sensor
page is
dialog
dialog box
menu.
Functions and dialog boxes
PX MultiSensor Configurator
241