Table of Contents
Advertisement
Simrad TV80 Reference Manual
• The screen captures you make are saved on the hard disk in the Processor Unit on JPG
format.
• Xml data is recorded using the
data, use
Operation
recorded data on the TV80. For this reason, the TV80 is inactive during playback.
Note
If you wish to record large amounts of TV80 data, make sure that you have enough space
on your hard disk. Unless your Processor Unit is equipped with a very large disk, we
recommend that you save the data to an external storage device.
Procedure
1
Select the
Operation
The icon is located under the
2
To start data recording, open the
Alternatively, simply select the red circle on the right side of the button.
The
button on the top bar changes colour to reflect that recording is active.
Record
3
To stop recording, open the
Alternatively, simply select the black rectangle on the left side of the button to stop
the recording.
Related topics
File Setup dialog box, page 192
Record function, page 191
Operation function, page 189
Screen Capture button description, page 147
Screen Captures function, page 213
Selecting Replay mode
The Replay mode allows you to play back previously recorded data. The TV80 is not
operational while in Replay mode. Neither transmission nor reception takes place.
All playback is controlled by the replay bar.
138
function on the
Record
to select Replay mode. This mode allows you to replay previously
icon.
menu. It is used to open the
Main
Record
button, and select Off.
Record
Operation
button, and select On.
menu. To play back
menu.
Operation
406388/B
Advertisement
Table of Contents
