Table of Contents
Advertisement
Simrad TV80 Reference Manual
7
Click the [X] in the top right corner to close the Control Panel.
Introduction to the basic procedures
Once you have powered up the complete TV80 system, and started the TV80 program, you
are ready to start the actual operation. Provided that the relevant catch sensors have been
placed on your gear, the TV80 will receive information, and present the data.
Observe these brief procedures to familiarize yourself with the basic operation.
The procedures are partly provided to get you acquainted with the basic functionality offered
by the TV80, and partly to set up the TV80 for normal use. The TV80 starts up using the
same settings as the last time you used it. If these settings are acceptable, continue operation.
Selecting menu language
You may prefer to use the TV80 with a user interface in your own language.
The
function allows you to select the language to be used in the TV80
Language
presentations, menus and dialog boxes.
Context
With a few exceptions, the chosen language will also be
used for all other texts on the TV80. The TV80 on-line
help may not be available for the language you choose.
If your language is not supported, the English on-line help
is provided.
Procedure
1
Select the
Display
The icon is located under the
2
Select the middle of the
Tip
You can also select the [+] or [–] buttons to navigate through the different options.
3
Select the language you wish to use.
36
icon.
menu. It is used to open the
Main
button to open the list of available options.
Language
menu.
Display
406388/B
Advertisement
Table of Contents
