Designer module
7
Select
and then
to save all the parameters and close the Designer module.
Save
Close
Result
Your current presentation will show the information from the TrawlEye sensor with the
gauges selected.
Related topics
Opening the Designer module, page 167
Gauges dialog box, page 181
Edit Gauge dialog box, page 183
Selecting the source of measurement of a gauge
Any sensor installed is capable of sending one or more measurements. The
Edit Gauge
dialog box allows you to select which measurement is going to present the selected gauge.
Although each gauge has its own properties, all of them have a common property, that
is the measurement assignment.
Prerequisites
The designer application must be open. There is at least one gauge added to the view.
171
406388/B