Table of Contents
Advertisement
Selecting measurement units
The TV80 is prepared to work with several international standards for units of measurements.
The choices in the
Units
that are used.
Context
The TV80 user interface presents many measurements. These measurements are for
example related to depth, speed or temperature.Use the
measurements you wish to work with. The TV80 uses these in all presentations. You only
need to define these once.
Procedure
1
Select the
Display
The icon is located under the
2
On the
menu, select
Display
Observe that the
3
Adjust the settings to fit your requirements.
4
Select
to save the chosen settings and close the dialog box.
OK
Related topics
Units dialog box, page 198
Selecting the location of the menu
In some situations, you may find it useful to change the location of the menu because it can
hide part of the TV80 presentation.
Context
The menu system is by default located on the right hand side of the TV80 presentation. You
can place the menu on the right or on the left hand side according to your operational needs.
Tip
Unless you need to make frequent changes to the operational parameters, you may wish to
hide the menu from the TV80 presentation. To hide the menu, select
To retrieve it, select
Menu
406388/B
dialog box allow you to control which units of measurements
icon.
menu. It is used to open the
Main
.
Units
dialog box opens.
Units
one more time.
Operating procedures
options to select the units of
Units
Display
on the top bar.
Menu
menu.
83
Advertisement
Table of Contents
