Creating A New Sensor View - Simrad TV80 Reference Manual

3 Select
Edit Layout
Observe that the
4 Type a new name.
Tip
If you do not have a computer keyboard connected to your TV80 system, select the
button to open an on-screen keyboard.
Keyboard
5 Select a function key.
The list will show only the "free" function keys.
Tip
The function keys on the bottom bar correspond to the different layouts defined in
the
Load Layout
sensors views. The function keys are always available at the bottom bar of the TV80
presentation.
6 Select to save the chosen settings and close the dialog box.
OK
Related topics
Load Layout dialog box, page 201
Layouts function, page 202
New Layout, page 224
Edit Layout dialog box, page 225

Creating a new sensor view

When you edit a view, you can add or remove gauges, resize them and save that view with a
name of your choice. In order to create a new view, you have to edit its content or its name.
Prerequisites
In order to create a new view or editing its content, you must open the TV80
There is at least one layout created. In this context, the different combinations of views is
called layout.
Context
In a large system with many sensors in simultaneous use, it can be useful to have different
ways of having the information presented. According to the operating scenario or your
406388/B
.
dialog box opens.
Edit Layout
dialog box. They provide fast access to the defined layouts of the
Operating procedures
.
Designer
91