Service Mode; Outline - Canon imageFORMULA DR-C125 Service Manual

CHAPTER 5 TROUBLESHOOTING
II. SERVICE MODE

1. Outline

To execute the service mode, install
the software (service tool) for the service
mode, which is stored in the packaged
setup disc in the computer for servicing.
Note that the service mode is only
supported on Windows OS.
The system requirements for the
computer are equivalent to those indicated
in the "User Manual".
processing speed drops due to the CPU or
memory capacity, the service mode is still
available.
This service tool was created based
on the tool for the DR-2010C/2510C, and
can also be
DR-2010C/2510C.
The service screen is shown below.
Figure 5-201
5-2
When the
used with the
COPYRIGHT © CANON ELECTRONICS INC. 2011
On the service screen, there are
buttons to select each specified mode.
Each service mode starts from this screen.
A list of the modes is show below.
No. Button displayed/description
1 All Adjustment
Performs all adjustments of the
following No.2-4, relating to image
reading.
2 Registration Adjustment
Performs
adjustment.
3 Light Adjustment
Performs fine adjustments to the
shading correction value.
4 Document Sensor Adjustment
Fixes the initial value of the amount
of light received of the document
sensor.
5 Firm Load
Changes the firmware.
6 About
Displays the version of the service
mode.
7 Dcon Check
Checks operations of the hardware
inside of the machine, such as an
operation key, sensor, and motor.
8 Check Device
Displays the internal version of the
device. Reset the serial number.
9 Manual Adjust
Manually adjusts the scale and
registration of images.
10 Counter
Displays and updates the counters.
Table 5-201
the registration
CANON DR-C125 FIRST EDITION