Danfoss VLT Midi Drive FC 280 Programming Manual page 88

Parameter Descriptions
14-90 Fault Level
Use this parameter to customize fault levels. Use the 8
to control the fault level of alarm 13, Overcurrent.
Option:
[5] Flystart
4 4
Index Alarm
0 Reserved
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 Overcurrent
Table 4.5 Table for Selection of Action when
Selected Alarm Appears (Parameter 14-90 Fault Level)
D = Default setting
x = Possible selection
86
®
VLT Midi Drive FC 280
th
Function:
At start-up, the frequency converter tries to
catch a spinning motor. If this option is
selected, parameter 1-73 Flying Start is
forced to [1] Enabled.
Trip lock Trip w.
delayed
– –
– –
– –
– –
– –
– –
– –
D x
Danfoss A/S © 07/2016 All rights reserved.
element
Flystart
–
–
–
–
–
–
–
x
MG07C302