Quick Menu On Nlcp - Danfoss VLT Midi Drive FC 280 Programming Manual

Programming

3.1.3 Quick Menu on NLCP

The Quick Menu gives easy access to the most frequently
used parameters.
3 3
1. To enter Quick Menu, press [Menu] until the
indicator in the display is placed above Quick
Menu.
2. Press [
press [OK].
3.
Press [
Quick Menu.
4. Press [OK] to select a parameter.
5.
Press [
setting.
6. Press [OK] to accept the change.
7. To exit, press either [Back] twice (or 3 times if in
QM2 and QM3) to enter Status, or press [Menu]
once to enter Main Menu.
14
VLT
▲ ▼
] [ ] to select either QM1 or QM2, then
▲ ▼
] [ ] to browse through the parameters in
▲ ▼
] [ ] to change the value of a parameter
Danfoss A/S © 07/2016 All rights reserved.
®
Midi Drive FC 280
MG07C302