Danfoss VLT Midi Drive FC 280 Programming Manual page 31

Parameter Descriptions
0-24 Display Line 3 Large
Select a variable to show in line 3.
Option:
[2119] Ext. 1 Output [%]
[3401] PCD 1 Write For Application
[3402] PCD 2 Write For Application
[3403] PCD 3 Write For Application
[3404] PCD 4 Write For Application
[3405] PCD 5 Write For Application
[3406] PCD 6 Write For Application
[3407] PCD 7 Write For Application
[3408] PCD 8 Write For Application
[3409] PCD 9 Write For Application
[3410] PCD 10 Write For Application
[3421] PCD 1 Read For Application
[3422] PCD 2 Read For Application
[3423] PCD 3 Read For Application
[3424] PCD 4 Read For Application
[3425] PCD 5 Read For Application
[3426] PCD 6 Read For Application
[3427] PCD 7 Read For Application
[3428] PCD 8 Read For Application
[3429] PCD 9 Read For Application
[3430] PCD 10 Read For Application
[3450] Actual Position
[3456] Track Error
0-30 Custom Readout Unit
Set a value to be shown in the LCP. The value has a linear,
squared, or cubed relation to speed. This relation depends on the
unit selected.
Option:
[0] None
[1] %
*
[5] PPM
[10] 1/min
[11] RPM
[12] Pulse/s
[20] l/s
[21] l/min
[22] l/h
[23] m³/s
[24] m³/min
[25] m³/h
[30] kg/s
[31] kg/min
[32] kg/h
[33] t/min
[34] t/h
[40] m/s
[41] m/min
[45] m
[60] °C
[70] mbar
MG07C302
Programming Guide
0-30 Custom Readout Unit
Set a value to be shown in the LCP. The value has a linear,
squared, or cubed relation to speed. This relation depends on the
Function:
unit selected.
Option:
[71]
[72]
[73]
[74]
[80]
[120]
[121]
[122]
[123]
[124]
[127]
[140]
[141]
[160]
[170]
[171]
[172]
[173]
[180]
0-31 Custom Readout Min Value
Range:
0 CustomRea-
doutUnit
Function:
0-32 Custom Readout Max Value
Range:
100 Custom-
ReadoutUnit
0-37 Display Text 1
Range:
[0 - 0 ] Free text, for example used for the device tag of
Danfoss A/S © 07/2016 All rights reserved.
bar
Pa
kPa
m WG
kW
GPM
gal/s
gal/min
gal/h
CFM
ft³/h
ft/s
ft/min
°F
psi
lb/in2
in WG
ft WG
HP
Function:
[ 0 - This parameter sets the
999999.99 minimum value of the custom
*
CustomRea- readout (occurs at 0 speed). It is
doutUnit] only possible to select a value
different from 0 when selecting a
linear unit in
parameter 0-30 Custom Readout
Unit. For quadratic and cubic
units, the minimum value is 0.
Function:
[ 0.0 - This parameter sets the
999999.99 maximum value to be shown
*
CustomRea- when the motor speed has
doutUnit] reached the value set for
parameter 4-14 Motor Speed
High Limit [Hz].
Function:
fieldbus application.
Function:
4 4
29