Turning The Light Source On Or Off; Activating Marriage; Activating Imb Marriage - Christie CP2420-Xe Installation And Setup Manual

Turning the light source on or off

Turn the light source on to display content or view test patterns. Turn the light off to extend the life of
the light source.
• To turn the light source on or off, in the right toolbar, select and hold Light.

Activating marriage

You must complete marriage to display content and to comply with the Digital Cinema Initiatives (DCI)
specification.
For more information on marriage, refer to CineLife+ User Guide (P/N: 020-103073-XX).
You cannot complete marriage remotely because you must be able to press the Marriage button on the
input panel during the marriage process.
1. In the left navigation menu, select Service Setup > Marriage Setup.
2. Select Start and complete the Marriage Setup wizard.
3. Select Finish.
4. Verify the marriage ring is installed correctly and an anti-tamper alarm does not appear on the
touch panel.

Activating IMB marriage

After selecting the IMB type, you must install the IMB and complete marriage to display secure
content. You cannot complete marriage remotely.
The Marriage wizard requires you to confirm the IMB has not been tampered with.
1. Install the IMB in the available slot on the projector.
For more information, see the documentation provided by the IMB manufacturer.
2. In the left navigation menu, select Service Setup > Marriage Setup.
3. Select Start and confirm the security manager (SM), service door, and marriage ring are
secure.
4. Select Next and complete the marriage checklist.
5. Select Next and enter the marriage user and password credentials.
6. Select Login.
7. To start the marriage process, press the Marriage button on the projector within 30 seconds.
The system starts the marriage process and indicates when the process is completed
successfully.
8. Select Finish.
CP2420-Xe and CP4420-Xe Installation and Setup Guide
020-103555-01 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Connecting devices and establishing communication
34