Selecting Imb Preferences; Activating Marriage - Christie CP2415-Xe Installation And Setup Manual

Selecting IMB preferences

Choose from the available options to set the type of integrated media block (IMB).
1. To set the type of IMB, select Service Setup > Preferences.
2. Select IMB.
3. In the Type list, select from the available IMB models.
4. When the system prompts you to reboot the projector, select Reboot.
5. After the projector has restarted, log in with your user account.

Activating marriage

After selecting the IMB type, you must install the IMB and complete marriage to display secure
content and to comply with the Digital Cinema Initiatives (DCI) specification. You cannot complete
marriage remotely.
For more information on marriage, refer to CineLife+ User Guide (P/N: 020-103073-XX).
You cannot complete marriage remotely because you must be able to press the Marriage button on
the input panel during the marriage process.
1. In the left navigation menu, select Service Setup > Marriage Setup.
2. Select Start and complete the Marriage Setup wizard.
3. Select Finish.
4. Verify the marriage ring is installed correctly and an anti-tamper alarm does not appear on the
touch panel.
CP2415-Xe Installation and Setup Guide
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Connecting devices and establishing communication
29