Logging Into The Projector; Turning On Or Off The Light Source; Activating Marriage; Disposing Of The Product Packaging - Christie CP4440-RGB Installation And Setup Manual

Logging into the projector

Log into the projector to access projector menus.
1. Select Login.
2. In the User list, select a user name.
3. Enter your password.
4. Select Login.

Turning on or off the light source

Turn on the light source to display content or view test patterns. Turn off the light to extend the life of
the light source.
• To turn on or off the light source, in the right toolbar, select and hold Light.

Activating marriage

After selecting the IMB type, you must install the IMB and complete marriage to display secure
content and to comply with the Digital Cinema Initiatives (DCI) specification. You cannot complete
marriage remotely.
For more information on marriage, refer to CineLife+ User Guide (P/N: 020-103073-XX).
You cannot complete marriage remotely because you must select the Marriage button on the input
panel during the marriage process.
1. In the left navigation menu, select Service Setup > Marriage Setup.
2. Select Start and complete the Marriage Setup wizard.
3. Select Finish.
4. Verify the marriage ring is installed correctly and an anti-tamper alarm does not appear on the
touch panel.

Disposing of the product packaging

Once the product has been installed and set up, Christie recommends reusing or recycling the product
packaging according to your local regulations.

Completing the installation checklist

Complete the provided installation checklist (P/N: 020-103137-XX) and return it to Christie.
CP4440-RGB and CP4450-RGB Installation and Setup Guide
020-103072-05 Rev. 1 (01-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
45