Function Description Binary Trigger; Manual Trigger Start - Siemens SIPROTEC 5 Manual

[scgrad01-151112-01.tif, 1, en_US]
Figure 7-45
dM Change of the measurand
dt Change of the filter time

Function Description Binary Trigger

7.3.3
7.3.3.1

Manual Trigger Start

The fast-scan recorder and the slow-scan recorder can be manually triggered.
They can trigger the start of the recording as follows:
•
Manually by the fault recorder (function key on the operation panel)
•
Via DIGSI 5
•
Via any IEC 61850 client (e.g., SICAM PQS with IEC 61850)
NOTE
i
i
The manual trigger is started by pressing the function keys routed to the >Manual start. In the applica-
tion templates, Function key 1 is the default for the fast-scan recorder and Function key 2 is the default
for the slow-scan recorder (see
The record time depends on the configured value Manual record time for the manual trigger start.
Manual Start of the Trigger with Information Routing
For the fast-scan recorder and the slow-scan recorder, you route the manual trigger start in the Information
routing in the matrix row >Manual start to the inputs that can be assigned binary signals.
[scmantrm-280113-01.tif, 1, en_US]
Figure 7-46
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
dM/dt
Figure 7-49).
Routing the Manual Trigger Start
7.3 Function Description Analog and Binary Triggers
Fault Recorder
265