Siemens SIPROTEC 5 Manual page 351

Fault recorder, v7.50 and higher
Hide thumbs Also See for SIPROTEC 5:
Table of Contents

Advertisement

Measurand
Routing Pwr:S tot
Routing Pwr:PF tot
Routing Pwr:P
Routing Pwr:Q
Routing Pwr:S
Routing Pwr:PF
Measuring Transducer – I/O Modules (for Example, IO212)
You will find information about the refresh rate and the possible routings of the measuring-transducer meas-
urands in the following table.
Table 7-11
Measurand
TD scale MV 1 to 8
Measuring Transducer – Measuring-Transducer Module (for Example, ANAI-CA-4EL)
You will find information about the refresh rate and the possible routings of the measuring-transducer meas-
urands in the following table.
Table 7-12
Measurand
TD scale MV 1 to 4
TD direct MV 1 to 4
PQ 10/12 Cycles
The measurement determines the RMS value of the power voltage over a 10-period time interval for 50 Hz
distribution systems and over a 12-period time interval for 60 Hz distribution systems. All 10/12-period time
intervals are captured without gaps and without overlaps
You will find information about the average value, the refresh rate, and the recommended routing of the PQ
10/12 cycles in the following tables.
Table 7-13
Measurand
PQ 10/12cyc:f
PQ 10/12cyc:Vph rms 200 ms
PQ 10/12cyc:Vpp rms 200 ms
PQ 10/12cyc:VN rms
PQ 10/12cyc:u0
PQ 10/12cyc:u2
18
Can be set in the Measurement window parameter: 10 ms; 20 ms; 40 ms; 60 ms; 80 ms; 100 ms
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Refresh Rate
Half periods
Half periods
Half periods
Half periods
Half periods
Half periods
Using Measuring-Transducer Measurands – I/O Modules (for Example, IO212)
Refresh Rate
10 ms
Using Measuring-Transducer Measurands – Transformers (for Example, ANAI-CA-4EL)
Refresh Rate
200 ms
200 ms
Using PQ 10/12 Cycle Measurands
Refresh Rate
200 ms
200 ms
200 ms
200 ms
7.6 Measurands and Recorder Routing Functions
FSR
SSR
X
X
X
X
X
X
X
X
X
X
X
X
18
FSR
SSR
X
X
FSR
SSR
X
X
X
X
Use in
FSR
SSR
CR
X
X
X
X
X
X
X
X
X
X
X
X
Fault Recorder
Use in
CR
TR
X
X
X
X
X
X
Use in
CR
TR
X
Use in
CR
TR
X
X
Recommended
Average Value
TR
CR
10 s
10 min
10 min
10 min
10 min
10 min
351

Advertisement

Table of Contents
loading

This manual is also suitable for:

Siemens 7ke85

Table of Contents