[scautcp2-220114-01-DE, 1, en_US]
Figure 6-47
This protocol is also available for Port J of the integrated Ethernet interface of the base module (refer to
following figure).
[scautcp3-220114-01-DE, 1, en_US]
Figure 6-48
With the selection of the SUP protocol for the 20-mA unit, DIGSI automatically adds the Analog units function
group and the 20-mA unit Ether. function to your device configuration (refer to the following figure).
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Activation of the protocol
Selection of the Protocol
Function-Group Types
6.5 Function-Group Type Analog Units
187