Siemens SIPROTEC 5 Manual page 108

Applications
4.2 Application Template and Functional Scope for the Fault Recorder
Table 4-4
Signal
UserSPS
>Manual start
Recording started
Record made
The change to the function key names is described in chapter
108
Default Settings of the User-Defined Signals in the Slow-Scan Recorder
Routed in the Tab
Binary input 1
Function key 2
LED 3
LED 4
Routed as
H (active without voltage)
P (trigger pulse)
U (unbuffered)
U (unbuffered)
7.3.3.1 Manual Trigger Start.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017