Siemens SIPROTEC 5 Manual page 142

Function-Group Types
6.2 Function-Group Type Voltage/current 1-Phase
The function group has the following interfaces with the measuring points:
•
1-phase voltage
The 1-phase voltage is provided via this interface. All values that can be calculated from the measurands
are also provided via this interface.
•
1-phase current
The 1-phase current is provided via this interface. All values that can be calculated from the measurands
are also provided via this interface.
[sc_measuring points, 1, en_US]
Figure 6-6
[sc_routing MP to FG, 1, en_US]
Figure 6-7
Equipment Data
The rated voltage and rated current as well as the neutral-point treatment of the object or the equipment are
defined here. These data apply to all functions in the Voltage/current 1-phase function group.
Reset the LED Group
Using the Reset the LED group function, you can reset the stored LEDs of the functions in one specific func-
tion group while the activated, stored LEDs of other functions in other function groups remain activated.
142
Assigning Measuring Points
Connecting Measuring Points to the Voltage/Current 1-Phase Function Group
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017