Continuous Recorder; Overview Of Functions; Structure Of The Function; Function Description - Siemens SIPROTEC 5 Manual

No.
_:2731:52
_:2731:53
Binary IO
_:10081:300
_:10081:502
_:10081:503
_:10081:310
_:10081:311
_:10081:314
_:10081:322

Continuous Recorder

7.2.8
7.2.8.1

Overview of Functions

Continuous recorders are used for data acquisition of the measured values over a longer time period. Thus,
long-time analyses of the power system behavior can be performed. The continuous recorder forms the arith-
metic average value over the averaging time.
7.2.8.2

Structure of the Function

The function Continuous recorder is preconfigured once at the factory. Within the Recorder function group,
the Continuous recorder can be operated a maximum of 5 times.
[dwcont7k-161012-01.tif, 2, en_US]
Figure 7-29
7.2.8.3

Function Description

The continuous recorder is not a triggered recorder, runs constantly, and has large averaging times. The
continuous recorder saves the arithmetic average value of the process quantities (power, frequency, RMS
values of the fundamental component of currents, voltages and symmetric components).
In the course of parameterization, specify a maximum memory capacity for storage of the recordings. The
continuous recorder is organized as a ring buffer. When the memory is filled completely, the oldest data are
overwritten automatically.
Mode
The continuous recorder operates only if Mode is set to on .
The recording is interrupted if Mode is set to off during the recording. Recording starts again if Mode is set
to on again.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Information
General:Behavior
General:Health
Slow-scan 1:Start record
Slow-scan 1:>External start
Slow-scan 1:>Manual start
Slow-scan 1:Fault number
Slow-scan 1:Recording started
Slow-scan 1:Record made
Slow-scan 1:Recorder formatted
Structure/Embedding of the Function
Fault Recorder
7.2 Function-Group Type Recorder
Data Class Type
(Type)
O
O
C
I
I
O
O
O
O
247