Siemens SIPROTEC 5 Manual page 148

Function-Group Types
6.3 Function-Group Type Voltage/current 3-Phase
[scmeaspon-020215-01, 3, en_US]
Figure 6-10
NOTE
i
i
The current measuring points are optional within the Voltage-current 3-phase function group. If you do
not interconnect the current and power values, the current measuring points are not available.
[scfguive-130912-01.tif, 3, en_US]
Figure 6-11
Equipment Data
The rated voltage and rated current as well as the neutral-point treatment of the object or the equipment are
defined here. These data apply to all functions in the Voltage-current 3-phase function group.
148
Assigning Measuring Points
Connecting Measuring Points to the Voltage-Current 3-Phase Function Group
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017