Troubleshooting Sdhc Memory Card - Siemens SIPROTEC 5 Manual
Fault recorder, v7.50 and higher
Hide thumbs
Also See for SIPROTEC 5:
- Manual (272 pages) ,
- Operation manual (218 pages) ,
- Technical data manual (129 pages)
Table of Contents
Advertisement
Appendix
A.9 Troubleshooting SDHC Memory Card
A.9
Troubleshooting SDHC Memory Card
Troubleshooting
In the following table, the possible malfunctions of the SDHC memory card and their causes and remedies are
listed.
Table A-1
Defect
7KE85 device does not start in
Process mode and switches to Fall-
back mode
In the function block General Infor-
mation, the health state of the
recorder ((_:2701:53) Health)
switches to
alarm mode.
Remedy: Switch off the device auxiliary voltage and insert a Siemens SDHC memory card.
474
Troubleshooting SDHC Memory Card
Cause
The SDHC memory card is
defective.
The user does not use an
original Siemens SDHC
memory card.
No SDHC memory card is
inserted.
The SDHC memory card is
either defective or the card
has been removed during
operation.
Indication
SDHC memory card read/write
error. Insert a new Siemens
SDHC memory card.
Invalid or defective SDHC
memory card found. Insert a
new Siemens SDHC memory
card.
No SDHC memory card found or
memory card read/write
error. Insert a new Siemens
SDHC memory card.
No SDHC memory card found or
memory card read/write
error. Insert a new Siemens
SDHC memory card.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Advertisement
Table of Contents
