Siemens SIPROTEC 5 Manual page 349

[scinfora-280113-01.tif, 1, en_US]
Figure 7-70
NOTE
i
i
The measured values under the Recorder routing V and Recorder Routing VI functions are optimized
specifically for recording. Preferably use these measured values for routing to the various recorders.
Operational measured values can also be recorded. However, this is not recommended because of the low
refresh rate for the 7KE85 fault recorder.
Frequency
Long-term supervision can be performed using the measurand Routing f:f.
You will find information about the average value, the refresh rate, and the recommended routing of the
frequency measurands in the following table.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Routing Measured Values in the Information Routing
7.6 Measurands and Recorder Routing Functions
Fault Recorder
349