Operational Log - Siemens SIPROTEC 5 Manual

•
The routing of the selected indication is done via right click. Select one of the options in the list box
shown:
– Routed (X)
– Unrouted
[sc7kekon-220213-01.tif, 1, en_US]
Figure 3-3
For non-configurable logs (for example, setting-history logs) scope and type of logged indications are
described separately (see following chapter about logs).
3.1.5.2

Operational Log

Operational indications are information that the device generates during operation. This includes information
about:
•
State of device functions
•
Measured data
•
Power-system data
Exceeding or dropping below limiting values generates as an operational indication. Up to 2000 indications
can be stored in the operational log.
Reading from the PC with DIGSI 5
•
To reach the operational log of your SIPROTEC 5 device, use the project tree window.
Project → Device → Process Data → Logs → Operational log
•
The operational log is shown to you in the state last loaded from the device. To update (synchronization
with the device), click the button Read log entries in the headline of the indication list (see the following
figure).
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Indication Configuration in DIGSI 5
System Functions
3.1 Indications
47