Basic Data Types - Siemens SIPROTEC 5 Manual

System Functions
3.5 User-Defined Objects

Basic Data Types

3.5.2
The following data types are available for user-defined objects in the DIGSI 5 library under the heading User-
defined signals. Additionally, a folder for external signals is available (see chapter
User-Defined Signals
[sc_LB_userdefsig, 1, en_US]
Figure 3-36
Single-Point Indication (Type SPS: Single-Point Status)
The status of a binary input can be registered in the form of a single-point indication or forwarded as the
binary result from a CFC chart.
EXAMPLE
Acquisition using binary input, further processing in a CFC and/or signaling using an LED.
Single-Point Indication (Type SPS unsaved: Single-Point Status Unsaved)
In contrast to SPS single-point indications, the state of the SPS unsaved indication is not maintained after the
device restarts.
For this purpose, go to Properties > Details > Initialization > Restart and set the Value.
88
User-Defined Signals
3.5.5 External Signals).
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017