Security Log - Siemens SIPROTEC 5 Manual

[sckomhmi-230213-01.tif, 1, en_US]
Figure 3-14
Deletability
The communication logs of your SIPROTEC 5 device can be deleted. Read details about this in the chapter
3.1.10 Saving and Deleting the Log
Configurability
The communication logs are not freely configurable. The entries are preconfigured.

Security Log

3.1.8
Access to areas of the device with restricted access rights is recorded in the security log. Unsuccessful and
unauthorized access attempts are also recorded. Up to 500 indications can be stored in the security log.
Reading from the PC with DIGSI 5
•
To reach the security log of your SIPROTEC 5 device, use the project tree window.
Project → Device → Device Information → Logs → Security log
The security log is shown to you in the state last loaded from the device.
•
To update (synchronization with the device) click the button Update in the headline of the indication list.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Reading the Communication Log on the On-site Operation Panel of the Device
.
System Functions
3.1 Indications
57