Supervision Functions
8.9 Group Indications
The group-warning indication
Alarm Handling Group Indication
The
Group indication is exclusively for user-specific purposes. There is no internal device supervision
function that activates this indication. If the binary input signal
indication
(_:302) Group indication becomes active and is recorded in the operational log. In the
delivery condition there is no further response of the device. If the binary input signal is reset, the signal
302) Group indication drops out. Via a CFC chart, you can define when the binary input signal (_:505)
>Group indication is to be set.
410
(_:301) Group warning is prerouted to an LED of the base module.
(_:505) >Group indication is set, the
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
(_: