Siemens SIPROTEC 5 Manual page 227

NOTE
i
i
The pre-trigger time is not included in the displayed record duration.
In the following table, the various statuses of the records are displayed.
Table 7-3
Status
New
Download
Downloaded
Deleted from the device The recording has been deleted in the device, but is still stored in DIGSI 5.
[scplugin-161012-01.tif, 1, en_US]
Figure 7-15
NOTE
i i
To prevent records being lost, they must be stored regularly to DIGSI 5 if the allocated memory area is
exceeded.
Display in SIGRA
To perform additional analyses, open the record in SIGRA. SIGRA offers additional display modes and calcula-
tion methods for evaluating the recordings.
Click the SIGRA4 button to open the record in SIGRA (see the following figure).
²
[sciconsi-260213-01.tif, 1, en_US]
Figure 7-16
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Description of the Status of the Records in Logical Sequence
Description
After you click the Read records button, an overview of existing records in the
device is collected and those with the status New are displayed in DIGSI 5.
The recording is downloaded into DIGSI 5.
The recording has been downloaded to DIGSI 5 and can be opened with SIGRA, for
example.
Display of the Record in DIGSI 5
Procedure to Open a Record in SIGRA from DIGSI 5
Fault Recorder
7.1 Introduction to DIGSI 5
227