Siemens SIPROTEC 5 Manual page 55

[scparhmi-220213-01.tif, 1, en_US]
Figure 3-12
Indication Categories in the Setting-History Log
For this log, there is selected information that is stored in case of successful as well as unsuccessful parameter
changes. The following list gives you an overview of this information.
Table 3-3
Displayed Information
Selection editing+
Reject+
PG activation+
PG activation-
set+
Acceptance+
Acceptance-
DCF loaded
PG 1
For this log, there is selected information that is stored in case of successful as well as unsuccessful parameter
changes.
NOTE
i
i
•
The logged indications are preconfigured and cannot be changed!
•
This log, which is organized as a ring buffer, cannot be deleted by the user!
•
If you want to archive security-relevant information from the device without loss of information, you
must regularly read this log.
•
In the setting-history log you cannot route additional indication objects.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Reading the Setting-history Log on the On-Site Operation Panel of the Device
Overview of indication types
Explanation
Selection of settings group to be edited
Rejection of all changes successful
PG activation through command successful
PG activation through command failed
Parameter value was changed
Acceptance of change successful
Acceptance of change failed
DCF loaded into device
Settings group 1
System Functions
3.1 Indications
55