Stratasys J750 User Manual page 87

Stratasys J750 User Guide
4. Make sure that the build tray is empty. Confirm this in the wizard screen
➢ When using a Stratasys UV sensor box that you connect to the printer
➢ When using a stand-alone UV radiation meter, continue with "External
DOC-08040 Rev. E
and click Next.
Figure 4-98 Printer preparation
(TOL-03005-S), continue with "UV Sensor Connected to Printer" on the
next page.
UV Meter" on page 4-68.
4 Operating and Maintaining the Stratasys J750 3D Printer
4-66