Stratasys J750 User Guide
Additional
The flushing cycle you select in the Material Replacement Options screen
Flushing Cycles
determines how thoroughly to flush out material currently in the system.
After selecting the Economy cycle and completing the wizard, you might
decide that you require a more thorough flushing, to ensure accurate model
color. Or, you may notice that printed models are not satisfactory because
they contain traces of the previous material. If so, you can flush out more
material, so that the next models will be printed with pure material.
To perform additional flushing cycles:
➢ In the Advanced Settings screen, select Enable "flush again" options and
The Material Replacement Options screen appears, where you can select the
material(s) you need to flush again.
DOC-08040 Rev. E
click Apply.
Figure 4-22 Enable flush again options selected
4 Operating and Maintaining the Stratasys J750 3D Printer
4-20