Stratasys J750 User Guide
Cleaning the
The painted exterior plastic panels of J750 3D printers have a durable finish,
Exterior Panels
offering excellent chemical resistance to common cleaning materials. Follow
the recommendations below when cleaning these areas of the printer.
Acceptable Cleaning Agents
• mild soap solution
• common household cleaners and window cleaners
• common commercial and industrial detergents, 5% solution in water
• alcohol (ethanol, isopropanol), 10% to 40% solution in water
Wipe the exterior of the printer, using a soft cloth moistened with the
cleaning solution.
Unacceptable Materials
• industrial solvents
• cleaning agents containing hydrocarbons, ketones, esters and lacquer
thinners
• spray disinfectants
• abrasives and agents which could wear away the panel finish
DOC-08040 Rev. E
4 Operating and Maintaining the Stratasys J750 3D Printer
4-99