Stratasys J750 User Guide
2. After the printer-control computer boots, log in to Windows and launch
A HASP plug containing a valid product activation key is required on the
printer computer. This is supplied during printer installation or upgrade. If the
application does not open and a HASP message appears, contact your
dealer or Stratasys Customer Support.
All monitoring and controlling of the printer is done from this interface.
Figure 4-3 Stratasys J750 interface
DOC-08040 Rev. E
the printer-control program:
4 Operating and Maintaining the Stratasys J750 3D Printer
4-3