Stratasys J750 User Manual page 39

Stratasys J750 User Guide
Advanced The Advanced Settings dialog box enables you to configure the Material
Settings Replacement wizard for special purposes. If necessary, click Advanced
Settings in the Material Replacement Options screen before clicking Next.
Positioning By default, Automatic slot selection determines the best slot locations for the
cartridges in the material cabinet, based on materials currently in the system.
This ensures minimum flushing of materials currently loaded.
Select Manual slot selection if—
• there is a special need to load cartridges in certain slot locations.
• you only want to change one of the cartridges in certain slot locations.
Some materials cannot replace certain other materials. If you attempt to do
so, the wizard notifies you.
To select the slots for the cartridges manually:
1. In the Material Replacement Options screen, click Advanced Settings.
2. In the Advanced Settings screen, select Manual slot selection, and click
DOC-08040 Rev. E
Apply.
Figure 4-19 Manual slot selection
4 Operating and Maintaining the Stratasys J750 3D Printer
4-18