Stratasys J750 User Guide
16. When the following screen appears, remove the scale and clean the build
17. In the wizard screen, confirm that the build tray is clear and that the
DOC-08040 Rev. E
tray.
Figure 4-74 Remove Scale confirmation screen
cover is closed, and click Next.
The wizard uses the data collected to analyze the condition of the print
heads and optimize them so they print models with a uniform layer of
material.
❒ If the heads are in satisfactory condition, the following wizard screen
appears.
Figure 4-75 Final wizard screen, after optimizing print heads
4 Operating and Maintaining the Stratasys J750 3D Printer
4-52