Stratasys J750 User Manual page 66

3d printing system
Hide thumbs Also See for J750:
Table of Contents

Advertisement

Stratasys J750 User Guide
Cleaning the
To prevent excess printing material from accumulating around the print 
Print-Head
heads, a splash shield is installed on the bottom of the print block. Remove 
Splash Shield
the shield and clean it once a month, when cleaning the print heads (see 
"Cleaning the Print Heads, Roller and Wiper" on page 4-32).
To remove the print-head splash shield:
1.  Run the Cleaning wizard from the Options menu.
2.  Open the printer and place a mirror on the build tray.
3.  Put on cleaning gloves.
Caution
Uncured printing material on the print heads might cause skin irritation. Use
disposable cleaning gloves to protect your hands.
DOC-08040 Rev. E
When the printer moves components to the cleaning position, the 
following screen appears.
Figure 4-61 Wizard screen during cleaning tasks
4 Operating and Maintaining the Stratasys J750 3D Printer
4-45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents