Stratasys J750 User Manual page 108

Stratasys J750 User Guide
3. Make sure that the build tray is empty, and confirm this in the wizard
4. Select the UV lamp(s) to be replaced and click Next.
DOC-08040 Rev. E
Figure 4-134 Selecting the UV Lamp Replacement wizard
screen. Then, close the printer, and click Next.
Figure 4-135 Tray confirmation
The axes move to the "home" position.
Figure 4-136 UV lamp selection screen
4 Operating and Maintaining the Stratasys J750 3D Printer
4-87